Showing all 7 results
Protect your industrial automation electronics with authentic, fast-acting MP Series fuses. We supply OEM-grade replacement micro fuses designed specifically for Fanucâ„¢, Mitsubishi, and Siemens CNC control boards, power supplies, and servo drives with fast worldwide dispatch.
Essential MP Series Micro Fuse Protection for Industrial CNC Automation
In high-precision CNC manufacturing, electrical circuit protection is the first line of defense against catastrophic hardware failure. Among the most crucial safety components on modern machine tools is the MP Series fuse—a specialized micro fuse designed for ultra-fast clearing response under overcurrent conditions. Installed directly onto delicate printed circuit boards, these compact plug-in fuses protect multi-layer Main Boards, input/output channels, power units, and drive modules from fatal electrical spikes.
When an MP Series fuse opens due to a short circuit or voltage surge, it instantly isolates the fault to prevent permanent damage to high-value semiconductors like IGBT modules or specialized IC Hybrid components. At 24cnc.com, we understand that a single blown 50mA or 2A fuse can halt an entire automated production line. That is why we maintain an expansive stock of genuine, high-reliability replacement fuses in the MP series (including MP05, MP10, MP16, MP20, MP32, MP50, MP63, and MP75 variants), helping maintenance engineers and procurement specialists restore machine uptime without expensive OEM wait times.
Need Immediate Verification for your MP Series Fuse Amperage?
Our technical support engineers can cross-reference your part numbers and verify live stock in minutes.
Why Source Your MP Series Fuses From 24cnc.com?
100% Authentic Parts
We source genuine, OEM-spec micro fuses to ensure precise trip curves and exact physical dimensions. Never compromise delicate CNC electronics with unrated generic imitations.
Complete Circuit Protection Stock
Beyond the MP series, our warehouse carries complementary protection families like the LM Series, HM Series, HP Series, and GP Series fuses.
Global Express Logistics
We partner with premium couriers (DHL, FedEx, UPS) to provide rapid worldwide delivery, getting critical spare parts to machine shops and factories before downtime escalates.
Dedicated Automation Expertise
Our engineering team specializes in industrial automation. We help you verify whether a blown MP series fuse is an isolated nuisance event or symptomatic of a fault in downstream drive controllers.
Technical Selection Guide: Identifying & Cross-Referencing MP Series Fuses
Replacing micro fuses in CNC controllers requires strict adherence to current ratings, interrupting capacity, and physical form factors. Installing an incorrectly rated fuse risk damaging sensitive control circuits, such as Fanuc I/O Modules or Fanuc Controllers.
Follow these technical steps to select the precise MP Series replacement for your machine tool:
- Decode the Part Number Prefix: Fuses in the MP series use standardized numerical suffixes indicating continuous current rating. For example, an MP05 fuse is rated at 0.05A (50mA), an MP20 fuse represents 2.0A, and an MP50 fuse represents 5.0A. Always verify the printed code on the micro-fuse body.
- Inspect Board Mount & Physical Form Factor: MP micro fuses feature rectangular, dark green or black thermoset bodies with plug-in pin terminals designed for direct PCB socket insertion. Ensure the pin spacing matches your target socket on the Fanuc Power Supply Unit or motherboard.
- Verify Voltage and Interrupt Ratings: Standard MP fuses are rated up to 125V AC/DC with ultra-fast interrupting characteristics. Never bypass these components or substitute them with slow-blow glass fuses, as doing so removes vital protection from high-speed logic circuits.
- Investigate Underlying Fault Causes: If a newly installed MP series fuse opens immediately upon power-up, check secondary hardware such as peripheral Encoder Cables, power wiring, or Fanuc Servo Drive Units for short circuits or insulation degradation.
Technical Comparison: MP Series vs. Other CNC Fuse Families
Review the specifications below to determine the correct fuse series required across your automation hardware:
| Fuse Series | Current Range | Response Speed | Primary Application | Category Link |
|---|---|---|---|---|
| MP Series | 0.05A – 7.5A (e.g., MP10, MP20, MP50) | Very Fast Acting (Micro) | PCB Signal Line Protection, I/O Modules, Controller Boards | Browse MP Series |
| LM Series | 0.3A – 5.0A (e.g., LM10, LM20, LM50) | Fast Acting (Micro Clear) | Fanuc™ CNC Power Supplies & Control Boards | Browse LM Series |
| HM Series | 1.0A – 5.0A (e.g., HM10, HM32, HM50) | Fast Acting Plug-in | Spindle Amplifiers & High-Density Drive Controllers | Browse HM Series |
| HP / GP Series | 1.0A – 15A+ High-Current Micro | Fast Acting Power Protection | Main AC/DC Input Lines and Servo Power Units | Browse HP Series |
Explore Related CNC Spare Parts & Circuit Components
To support comprehensive preventative maintenance and control cabinet repairs, 24cnc.com offers thousands of replacement parts from trusted brands. Pair your MP series order with our complementary stock:
Frequently Asked Questions (FAQ) – MP Series Fuses
Order MP Series Replacement Fuses Today
Protect your investment and restore machine tool productivity. Browse our MP Series fuse catalog below or submit a direct inquiry for bulk pricing and express delivery options.