specifications:
Product: Main and Side Boards
Brand: FANUC
Model: A20B-2902-0341
Working voltage: 220 / 110 / 240 Volts
Description of Fanuc Memory Card
The FROM module with a capacity of 4MB (Flash ROM module 4MB) with the code FANUC A20B-2902-0341 is available online on the Cnc-Shopping website.
This FROM module is of SMD type and is designed for use in Fanuc 16-C and 18-C series CNC controllers.
The ROM/SRAM function in this system is for the CNC control parts, servo system and graphics system, and the SRAM memory is also used for system operation.
The FANUC A20B-2902-0341 module is installed on the main CPU board of the Fanuc machine, it is placed in the SMD socket and in the third slot (slot) on the main board.
This FROM 4MB module has a performance and quality guarantee.
In terms of manufacturing technology, rewritable ROMs are written by passing electrons through an electrically insulating layer and placing them on the floating gate of a transistor.
For this reason, this type of memory can only withstand a limited number of write and erase cycles, because the insulator eventually breaks down.
In early versions of EAROM, this limit could occur after about 1,000 write cycles, while in more modern memories such as Flash EEPROM, the durability can exceed 1,000,000 times.
However, this durability is not unlimited and, due to the higher cost per bit, flash-based memories will not completely replace magnetic disks in the near future.
The FANUC A20B-2902-0341 module is a reliable choice for increasing the efficiency and improving the performance of Fanuc CNC systems.
There are no reviews yet.